18mm Espagnolette Housing and Straight Turn Knob

18mm Espagnolette Housing and Straight Turn Knob Measurements

Housing Backset: 25mm

Turn Knob can take either the 16.5mm or 18mm ML Cylinders

Shaft Size is 7mm x 7mm

Order individual items separately

Manufacturer: Martin Lehmann

MLM Lehmann 18mm Espagnolette Housing and Straight Turn Knob Description

Installation Instructions

These 2 items can only be used in conjunction with each other. Installation is by way of the small pozzi screw on the end of the turn knob, by placing the shaft of the turn knob through the rear of the lock housing until it is fully inserted and then turning the pozzi screw this will enlarge the square shaft gripping the housing securely.

Espagnolette locks is a generic name to describe a system that uses round bars to lock a cabinet at the top and bottom of a cabinet. The lock when tuned either with a key or turn handle will rotate the bars which in turn rotate the hooks around pins which are situated at the top & bottom of the cabinet. Various locks can be used to rotate the bars. The “D” bar which is a standard size bar and used throughout the industry comes in 2 lengths 100cm or 200cm to ensure you have the correct length.