Free Delivery

on all web orders over £20*
 
Huwil Espagnolette Sliding Push Bar Lock
Huwil Espagnolette Sliding Push Bar Lock Measurements
Dimensions:  92mm x 18mm x 13mm
Nozzle:  18mm diameter x 22mm long
Hole centres:  32mm c/c
Brand: Huwil
Finish:  Nickel Plated
Manufactured by Lehmann
 
Compatible with Huwil VCS18 cylinders which can be found HERE
 
 
Huwil Espagnolette Sliding Push Bar Lock Description
 
Supplied as a housing only and is compatible with all of the Huwil VCS18 cylinders.  If you're faced with installing pedestal locks and cupboard locks in the same office enviroment but require the same key range to be used throughout than this is an ideal system.  A fully intechangeable cylinder system that can be fitted afterwards and removed if required.  The VCS18 cylinders also offer suiting options to enable the same lock to be used but under various different Master Keys.
Cylinders are easily removed with a removal pin, line up the circular indentation on the cylinder face with the line on the barrel push the pin down and the cylinder is released. The pins for removing the cylinder can be found HERE

Huwil Sliding Espagnolette Lock

Product Code: ULO020451161

£6.44
   Add To Cart  
+ -

 

Huwil Espagnolette Sliding Push Bar Lock

Huwil Espagnolette Sliding Push Bar Lock Measurements

Dimensions:  92mm x 18mm x 13mm

Nozzle:  18mm diameter x 22mm long

Hole centres:  32mm c/c

Brand: Huwil

Finish:  Nickel Plated

Manufactured by Lehmann

 

Compatible with Huwil VCS18 cylinders which can be found HERE

 

 

Huwil Espagnolette Sliding Push Bar Lock Description

 

Supplied as a housing only and is compatible with all of the Huwil VCS18 cylinders.  If you're faced with installing pedestal locks and cupboard locks in the same office enviroment but require the same key range to be used throughout than this is an ideal system.  A fully intechangeable cylinder system that can be fitted afterwards and removed if required.  The VCS18 cylinders also offer suiting options to enable the same lock to be used but under various different Master Keys.

Cylinders are easily removed with a removal pin, line up the circular indentation on the cylinder face with the line on the barrel push the pin down and the cylinder is released. The pins for removing the cylinder can be found HERE


© Unico Components Ltd 2019