Free Delivery

on all web orders over £20*
 
Huwil Espagnolette Lock Housing
Huwil Espagnolette Lock Housing Measurements
Dimensions:  53mm x 26mm
Nozzle:  18mm diameter x 25mm long
Backset: 15mm
Hole Centres:  64mm
Brand: Huwil
Manufactured by Lehmann
 
Dowels can be removed to be used as a stardard lay-on lock
Compatible with Huwil VCS18 cylinders which can be found HERE
 
AVAILABLE WHILE STOCKS LAST
 
 
Huwil Espagnolette Lock Housing Description
Supplied as a housing only and is compatible with all of the Huwil VCS18 cylinders.  If you're faced with installing pedestal locks and cupboard locks in the same office enviroment but require the same key range to be used throughout than this is an ideal system.  A fully intechangeable cylinder system that can be fitted afterwards and removed if required.  The VCS18 cylinders also offer suiting options to enable the same lock to be used but under various different Master Keys.
Cylinders are easily removed with a removal pin, line up the circular indentation on the cylinder face with the line on the barrel push the pin down and the cylinder is released. The pins for removing the cylinder can be found HERE
 
 
 

Huwil Espagnolette Housing

Product Code: SLO023711561

£5.77
   Add To Cart  
+ -

 

Huwil Espagnolette Lock Housing

Huwil Espagnolette Lock Housing Measurements

Dimensions:  53mm x 26mm

Nozzle:  18mm diameter x 25mm long

Backset: 15mm

Hole Centres:  64mm

Brand: Huwil

Manufactured by Lehmann

 

Dowels can be removed to be used as a stardard lay-on lock

Compatible with Huwil VCS18 cylinders which can be found HERE

 


AVAILABLE WHILE STOCKS LAST

 

 

Huwil Espagnolette Lock Housing Description

Supplied as a housing only and is compatible with all of the Huwil VCS18 cylinders.  If you're faced with installing pedestal locks and cupboard locks in the same office enviroment but require the same key range to be used throughout than this is an ideal system.  A fully intechangeable cylinder system that can be fitted afterwards and removed if required.  The VCS18 cylinders also offer suiting options to enable the same lock to be used but under various different Master Keys.

Cylinders are easily removed with a removal pin, line up the circular indentation on the cylinder face with the line on the barrel push the pin down and the cylinder is released. The pins for removing the cylinder can be found HERE

 

 

 


© Unico Components Ltd 2019