Free Delivery

on all web orders over £20*
Huwil Mortice Cylinder Housing for VCS18
Huwil Mortice Cylinder Housing for VCS18 Measurements
Dimensions:  18mm diameter x 23.5mm long
Finish:  Nickel Plated
Manufactured by Lehmann
 
This cylinder housing is for the Huwil Mortice Housing only
 
Huwil Mortice Cylinder Housing for VCS18 Description
Huwil Mortice Cylinder Housing for sliding doors.  Requires a lock housing & VCS18 inner cylinder which can be found here.
Supplied as a cylinder housing only and is compatible with all of the Huwil VCS18 cylinders when used with the lock housing.  If you're faced with installing pedestal locks and cupboard locks in the same office enviroment but require the same key range to be used throughout than this is an ideal system.  A fully intechangeable cylinder system that can be fitted afterwards and removed if required.  The VCS18 cylinders also offer suiting options to enable the same lock to be used but under various different Master Keys.
Cylinders are easily removed from the cylinder housing with a removal pin, line up the circular indentation on the cylinder face with the line on the barrel push the pin down and the cylinder is released. The pins for removing the cylinder can be found HERE
Huwil Mortice Cylinder Housing for VCS18
Huwil Mortice Cylinder Housing for VCS18 Measurements
Dimensions:  18mm diameter x 23.5mm long
Finish:  Nickel Plated
Manufactured by Lehmann
 
This cylinder housing is for the Huwil Mortice Housing only
 
Huwil Mortice Cylinder Housing for VCS18 Description
Huwil Mortice Cylinder Housing for sliding doors.  Requires a lock housing & VCS18 inner cylinder which can be found here.
Supplied as a cylinder housing only and is compatible with all of the Huwil VCS18 cylinders when used with the lock housing.  If you're faced with installing pedestal locks and cupboard locks in the same office enviroment but require the same key range to be used throughout than this is an ideal system.  A fully intechangeable cylinder system that can be fitted afterwards and removed if required.  The VCS18 cylinders also offer suiting options to enable the same lock to be used but under various different Master Keys.
Cylinders are easily removed from the cylinder housing with a removal pin, line up the circular indentation on the cylinder face with the line on the barrel push the pin down and the cylinder is released. The pins for removing the cylinder can be found HERE

Mortice Housing

Product Code: SLO013320161

£5.76
   Add To Cart  
+ -

Huwil Mortice Cylinder Housing for VCS18

Huwil Mortice Cylinder Housing for VCS18 Measurements

Dimensions:  18mm diameter x 23.5mm long

Finish:  Nickel Plated

Manufactured by Lehmann

 

This cylinder housing is for the Huwil Mortice Housing only

 

Huwil Mortice Cylinder Housing for VCS18 Description

Huwil Mortice Cylinder Housing for sliding doors.  Requires a lock housing & VCS18 inner cylinder which can be found here.

Supplied as a cylinder housing only and is compatible with all of the Huwil VCS18 cylinders when used with the lock housing.  If you're faced with installing pedestal locks and cupboard locks in the same office enviroment but require the same key range to be used throughout than this is an ideal system.  A fully intechangeable cylinder system that can be fitted afterwards and removed if required.  The VCS18 cylinders also offer suiting options to enable the same lock to be used but under various different Master Keys.

Cylinders are easily removed from the cylinder housing with a removal pin, line up the circular indentation on the cylinder face with the line on the barrel push the pin down and the cylinder is released. The pins for removing the cylinder can be found HERE


© Unico Components Ltd 2019