Huwil Mortice Lock Housing

Huwil Mortice Lock Housing Measurements

Dimensions:  47mm x 33mm

Backset:  15mm

Faceplate:  80mm x 12mm

Finish:  Nickel Plated

Manufactured by Lehmann

Huwil Mortice Lock Housing Description

Huwil Mortice Lock Housing for sliding doors.  Requires a cylinder housing & VCS18 inner cylinder.

Supplied as a housing only and is compatible with all of the Huwil VCS18 cylinders when used with the cylinder housing.  If you're faced with installing pedestal locks and cupboard locks in the same office enviroment but require the same key range to be used throughout than this is an ideal system.  A fully intechangeable cylinder system that can be fitted afterwards and removed if required.  The VCS18 cylinders also offer suiting options to enable the same lock to be used but under various different Master Keys.

Cylinders are easily removed from the cylinder housing with a removal pin, line up the circular indentation on the cylinder face with the line on the barrel push the pin down and the cylinder is released. The pins for removing the cylinder can be found HERE