Free Delivery

on all web orders over £20*
 
Sliding Glass Door Lock
Boring: 16mm
Glass Size: 7mm max
Key Range: Keyed Alike
Colour: Nickel Plated
Material: Steel body & key
Components: 1 cylinder, 2 housings, 2 keys, 3 transparent washers & 2 screws for joining the 2 housings together.
Key removable in locked position only.
Manufactured by Siso.
Each lock is supplied with 2 housings and transparent washers. Place a washer on the front housing and insert it into the pre-drilled 16mm bore hole and repeat the process with the back housing (this is identified by the 2 screw holes) screw the 2 components together and the housing is now secured to the glass. Insert the key into the barrel and place it through the housing, rotate the key clockwise 90 degrees and remove the key, this will leave the barrel in situ and lock the glass doors. To unlock insert the key, turn anti-clockwise 90 degrees and the key & barrel can be removed.
 
Sliding Glass Door Lock
Boring: 16mm
Glass Size: 7mm max
Key Range: Keyed Alike
Colour: Nickel Plated
Material: Steel body & key
Components: 1 cylinder, 2 housings, 2 keys, 3 transparent washers & 2 screws for joining the 2 housings together.
Key removable in locked position only.
Manufactured by Siso.
Each lock is supplied with 2 housings and transparent washers. Place a washer on the front housing and insert it into the pre-drilled 16mm bore hole and repeat the process with the back housing (this is identified by the 2 screw holes) screw the 2 components together and the housing is now secured to the glass. Insert the key into the barrel and place it through the housing, rotate the key clockwise 90 degrees and remove the key, this will leave the barrel in situ and lock the glass doors. To unlock insert the key, turn anti-clockwise 90 degrees and the key & barrel can be removed.

Sliding Glass Door Lock and Keyhole

Product Code: ULO015401461

£15.17
   Add To Cart  
+ -

 

Sliding Glass Door Lock

Boring: 16mm

Glass Size: 7mm max

Key Range: Keyed Alike

Colour: Nickel Plated

Material: Steel body & key

Components: 1 cylinder, 2 housings, 2 keys, 3 transparent washers & 2 screws for joining the 2 housings together.

Key removable in locked position only.

Manufactured by Siso.

Each lock is supplied with 2 housings and transparent washers. Place a washer on the front housing and insert it into the pre-drilled 16mm bore hole and repeat the process with the back housing (this is identified by the 2 screw holes) screw the 2 components together and the housing is now secured to the glass. Insert the key into the barrel and place it through the housing, rotate the key clockwise 90 degrees and remove the key, this will leave the barrel in situ and lock the glass doors. To unlock insert the key, turn anti-clockwise 90 degrees and the key & barrel can be removed.


© Unico Components Ltd 2019