Sliding Glass Door Lock with Keyhole to Differ

Sliding Glass Door Lock with Keyhole to Differ Measurements

Keyhole:  25mm diameter

Keyway:  38.5mm x 11mm

Boring: 16mm

Glass Size: 7mm max

Key Range: Differs

Material: Steel body & key

Finish: Nickel Plated

Manufactured by Siso

Components: 1 cylinder, 2 housings, 2 keys, 3 transparent washers & 2 screws for joining the 2 housings together.

Key removable in locked position only.

Sliding Glass Door Lock with Keyhole to Differ Description

Each lock is supplied with 2 housings and transparent washers. Place a washer on the front housing and insert it into the pre-drilled 16mm bore hole and repeat the process with the back housing (this is identified by the 2 screw holes) screw the 2 components together and the housing is now secured to the glass. Insert the key into the barrel and place it through the housing, rotate the key clockwise 90 degrees and remove the key, this will leave the barrel in situ and lock the glass doors. To unlock insert the key, turn anti-clockwise 90 degrees and the key & barrel can be removed.