Free Delivery

on all web orders over £20*
4m Sliding Door System 20kg
4m Sliding Door System 20kg Measurements
Comprising the following :
1 x 4m Aluminium top track
1 x 4m Aluminium bottom track
1 x Bottom roller set
Maxixmum Door Weight: 20 kg
Manufactured by Emuca
4m Sliding Door System 20kg Description
Suitable for lightweight sliding doors. The two rollers are fitted to the bottom of the door at either end, a guide is attached to the top of the door and this holds the door in place. If subsequent doors are required then additional kits can be purchased. Both the bottom track & top track can be routered in to a groove creating a semi flush fitting when the doors are aligned with the track. If 2 or 3 doors are needed then the track can be fitted  parallel to each other ensuring there is a sufficient gap between doors allowing them to run past each other.
 
4m Sliding Door System 20kg
4m Sliding Door System 20kg Measurements
Comprising the following :
1 x 4m Aluminium top track
1 x 4m Aluminium bottom track
1 x Bottom roller set
Maxixmum Door Weight: 20 kg
Manufactured by Emuca
4m Sliding Door System 20kg Description
Suitable for lightweight sliding doors. The two rollers are fitted to the bottom of the door at either end, a guide is attached to the top of the door and this holds the door in place. If subsequent doors are required then additional kits can be purchased. Both the bottom track & top track can be routered in to a groove creating a semi flush fitting when the doors are aligned with the track. If 2 or 3 doors are needed then the track can be fitted  parallel to each other ensuring there is a sufficient gap between doors allowing them to run past each other.
 

Sliding Door System 20kg

Product Code: SDF632100000

£64.98
   Add To Cart  
+ -

4m Sliding Door System 20kg

4m Sliding Door System 20kg Measurements

Comprising the following :

1 x 4m Aluminium top track

1 x 4m Aluminium bottom track

1 x Bottom roller set

Maxixmum Door Weight: 20 kg

Manufactured by Emuca

4m Sliding Door System 20kg Description

Suitable for lightweight sliding doors. The two rollers are fitted to the bottom of the door at either end, a guide is attached to the top of the door and this holds the door in place. If subsequent doors are required then additional kits can be purchased. Both the bottom track & top track can be routered in to a groove creating a semi flush fitting when the doors are aligned with the track. If 2 or 3 doors are needed then the track can be fitted  parallel to each other ensuring there is a sufficient gap between doors allowing them to run past each other.

 


© Unico Components Ltd 2020