Siso MIC Drawer Lock Housing.
Diameter x 19mm
Length x 22mm
Complete with rosette.
Use with all Siso MIC cylinders available here
Master Key & Removal Key available here
Unless otherwise requested housings will be sent prefitted with the cylinders ordered, If housings are ordered on their own they will arrive with a nylon plug fitted. This is to prevent damage during transit.
Installation of cylinder into an empty lock body
1.Make sure that the arrow on the plastic plug points towards the lock tongue. If not in the correct position take a flat headed screwdriver and turn the plug to the correct position.
2. Once aligned remove the plug from the housing.
3. Remove the protective transparent cover from the cylinder.
4. Fully insert the cylinder into the housing.
5. Turn the key 90º & withdraw the key to complete installation.