Siso MIC Inner Cylinder Differs
A Master Key MK12 is available for this range here
For use with all Siso MIC Housings
Supplied with 2 hinged keys as standard
Key numbers stamped on keys & cylinders
Installation of cylinder into an empty lock body
1.Make sure that the arrow on the plastic plug points towards the lock tongue. If not in the correct position take a flat headed screwdriver and turn the plug to the correct position.
2. Once aligned remove the plug from the housing.
3. Remove the protective transparent cover from the cylinder.
4. Fully insert the cylinder into the housing.
5. Turn the key 90º & withdraw the key to complete installation.